Linia is a lighting system designed to be fitted to the ceiling, allowing for the creation of continuous lines. It comprises a lighting module and a technical module. The lighting module is available in different lengths which holds T5 or LED bulbs, and also incorporates electronic equipments. It can also be made to incorporate emergency lighting. There are two diffusers running lengthways along this section to blow hot or cold air, and an accessory can be included to adjust the flow. The technical or service module, which can be made to any size depending on the client's requirements, can be used to incorporate a loud-speaker system, fire detection and extinguishing equipment, motion sensors, photocells, etc.
The section comprising the lamp and the hot/cold air diffuser is made from pre-lacquered injected aluminium. The air diffuser section is made out of electro galvanised steel. Linia comes with two types of diffuser: micro-perforated steel or opaline polycarbonate. Depending on the type of diffuser chosen, the light is available in two different finishes: matte white (RAL 9010) for the polycarbonate diffuser, and matte grey (RAL 9006), for the micro-perforated diffuser.
Linia is supplied with a terminal box with a set of three wires, which is longer than the lamp, to facilitate the modular installation of the Linia system. It can also be ordered with an adjustable ballast, can be made compatible with the Dali system, and also with a single fluorescent bulb.
|E280 DP LED: LED 2 x 26,2W 8360lm 450mA 3000K CRI>80 230V|
|E280 DP FLUO: Fluo. 2 x 80W (G5)|
|E254 DP LED: LED 2 x 21W 6360lm 450mA 3000K CRI>80 230V|
|E254 DP FLUO: Fluo. 2 x 54W (G5)|
|E239 DP LED: LED 2 x 15,7W 5020lm 450mA 3000K CRI>80 230V|
|E239 DP FLUO: Fluo. 2 x 39W (G5)|
|E224 DP LED: LED 2 x 10,5W 3180lm 450mA 3000K CRI>80 230V|
|E224 DP FLUO: Fluo. 2 x 24W (G5)|
|E280 DM: Fluo. 2 x 80W (G5)|
|E254 DM: Fluo. 2 x 54W (G5)|
|E239 DM: Fluo. 2 x 39W (G5)|
|E224 DM: Fluo. 2 x 24W (G5)|